Download the latest Servodan Catalogue in PDF format (4.5Mb) Download
Lighting Control
Servodan is a professional company which was established in 1958 and located in
Sønderborg near the German border. Servodan employ approx. 50 employees and
manufactures unique solutions within the range of lighting control and door bell systems.
Movement Sensor for Individual Room Control
Movement sensor PIR 3600 for flush mounting.
•
This sensor is a passive infrared sensor which reacts
to
temperature changes and movement by people
•
The built-in sensor blocks off lighting during the day
if there is sufficient daylight. Lux level is set in the
sensor
•
4 Sensitivity-settings for tailored use
•
Accessory
IR remote (41-920)
Movement Sensor for Zone Control
Minilux PIR movement sensor for zone control
•
Can be used in large areas
•
Up to 18 slaves can be connected to one relay
•
Detection area 3600/Ø7 m
(38m2 at mounting height 2.5m)
•
Time Delay off switch
•
4 Sensitivity-settings for tailored use
•
Applications
•
Offices split into work areas
•
Exhibition premises
•
Conference premises
•
School premises
•
Open office area
•
Accessory
IR remote (41-920)
Movement Sensor for Outdoor Lighting
Minilux PIR Sensor suitable for controlling lightingin
surrounding outdoor areas
•
Responds to movement and temperature differences
•
A built-in light sensor prevents the light to switch on
during the day
•
Detection angle 200˚ with range of 3-14m
•
The lighting switch can be switched on with an indoor
switch which switches off when the adjusted time expires
•
Time delay of up to 12 min
•
External setting of lux level, time and sensitivity
•
The head of the sensor can be moved slightly
up and down
Minilux movement sensor for outdoor lighting control
•
This sensor has an integrated light sensor, which
guarantees that the lighting is only switched on when
detecting people in motion and the lux level is below the
preset level
•
Light remains on as long as moving people are detected
•
At a height of 2.5 m, the sensor has a range of 14 m
over 180˚
•
Time delay of up to 30 min
•
The head of the sensor can be rotated 250 horizontally
to the right or left
•
Facility for ceiling installation as well as to block
detection range
Dual Movement Sensor for flush mounting
An intelligent sensor that lets small movements keep
the lighting on
•
The sensor is self adjusting, which means the it will
find the optimal setting for the area automatically
•
Self adjusting "Fuzzy logic"
•
No triggering errors
•
Registers small movements down to 2-3 cm
•
Combines the advantages of infrared & ultrasound
•
Error-free triggering: Infrared and Ultrasound combined
E.g., a weak infrared signal and a strong ultrasound
signal will be sufficient to turn the lighting on
